Use
13
en
5.6
Results
After 5 to 25 seconds (depending on the instrument temperature and
the measured concentration) the measured value is shown in the
display and stored in the device (on page 5 section "Screens").
The presentation of the measured value depends on the pre-set mode.
It can be displayed by the following massages:
ZERO
,
PASS
, or the
value in a
decimal presentation.
The test person has got an unobtrusive alcohol level.
It can be displayed the following massages:
ALERT
,
FAIL
, or the value
in a
decimal presentation.
The test person has got an noticeable alcohol level.
Continue aton page 15 section "After sampling".
A sampling with low volume can cause an error. In this case the horn
sounds briefly, the red LED flashes and the display shows
Insufficient
Volume
(on page 5 section "Screens"). The exhalation breath during
the sampling is not to weak or not evenly enough.
Repeat the test (on page 11 section "Adequate breath sample").
