10
Dräger Alcotest 6510
Performing the measurement
5.2.3
Test result
The breath alcohol value is measured in µg/100 mL. The result is dis-
played as
"PASS"
or
"FAIL"
.
PASS
Driver
≤
22
μ
g/100 mL
Specified
≤
9
μ
g/100 mL
FAIL
Driver > 22
μ
g/100 mL
Specified > 9
μ
g/100 mL
z
Press the
OK
- button to re-
turn to the Persons screen.
5.3
Error in delivering the breath sample
If the sampling volume is too low
or the sampling time is too short,
the display shows:
"Insufficient
Volume"
.
z
The beep sounds briefly and a
red light flashes.
z
To repeat press the
OK
- button.
z
02523840.eps
Persons
Driver
Specified
Use the
M
and
buttons to
choose person and the
OK
-button to confirm.
The device is ready for
measurement after 4 seconds.
If the subject exhales incorrectly
e.g. by abruptly stopping or
sucking at the end of sampling, the
display shows either "
Blow Inter-
ruption
" or "
Insufficient Volu-
me
".
z
The beep sounds briefly and a
red light flashes.
z
To repeat press the
OK
- button. The device is ready for measure-
ment after 4 seconds.
z
02523840.eps
Persons
Driver
Specified
Use the
M
and
buttons to
choose person and the
OK
-button to confirm.
The device is ready for
measurement after 4 seconds.
02923840.eps
PASS
03023840.eps
FAIL
03123840.eps
OK
Volume
Insufficient
NOTICE
Switching the device off in the meantime does not reduce the
waiting period!
03223840.eps
OK
Interruption
Blow
i
i
