manualshive.com logo in svg

DR DR ALL-TERRAIN FIELD and BRUSH MOWER, Safety & Operating Instructions Manual

Share
Download
DR DR ALL-TERRAIN FIELD and BRUSH MOWER Safety & Operating Instructions Manual Download Page 17

DR

®

 FIELD and BRUSH MOWER Safety & Operating Instructions

13

Battery

Electric-Starting Models

Proper care can lengthen the life of a battery.  Follow these recommendations to ensure your
battery's best performance and long life:

·

 

Do not allow the battery charge to get too low.  If the machine is not used, the battery should be
charged every 4 – 6 weeks.

·

 

Store an unused battery in a dry area that does not freeze.

·

 

Do not charge an already charged battery.  In theory, our battery can not be overcharged with a
trickle charger; however, when a battery is fully charged and the charger is still on, it generates
heat that could be harmful to the battery.  A fully charged battery will read 12V-13.2V with a
voltmeter.

·

 

Do not continue to crank your engine with a low battery.

Charging the Battery

If the battery loses its charge, you'll need to use a trickle charger (like the DR

®

 Battery Charger) to

recharge it.  The charger should have an output of 12 volts at no more than 6-8 amps.

·

 

At 1 amp the battery may need to be charged for as much as 48 hours.

·

 

At 2 amps the battery may need to be charged for as much as 24 hours.

·

 

At 6-8 amps the battery will be charged in 2 to 3 hours.

Caution: 

 At 6-8 amps a battery can overcharge.

Note:

   Using the recoil starter (ATM10E Briggs & Stratton model only) and then running the engine

will not recharge a dead battery.

Summary of Contents for DR ALL-TERRAIN FIELD and BRUSH MOWER









































Reviews:

No comments

Brands by name

Popular brands

Load more brands