4
ASSEMBLY
After cleaning, follow these steps to assemble your pump. Make sure all parts are
completely dry from cleaning before any assembly.
Insert the white
Valve
to the
underside of the
Connector.
Snap the
Breastcup
on to the
Connector
. Press edges firmly to
make sure it’s secure all around.
Install
Cap Insert
on to the
Cap
,
aligning the two pegs in the holes.
Press the parts firmly together.
Attach
Handle
by pressing upward
on the
Cap Insert
to extend the
stem.
Latch the hole in the
Handle
on to
the
Stem
while sliding the
Handle
on to the two white handle pegs.
Hinge the front of the
Cap
assembly on to the clear hinge
tab on the
Connector.
Press the
Cap
assembly on to the
Connector
until you hear a snap.
Screw the
Collection Bottle
on to
the
Connector.
Tighten gently.
Note:
For your pump to work as designed, all parts must be properly assembled. Make sure all parts
are snugly fit so you have an air tight pump.
