17. Operation and Maintenance of Neon pR
Dr. A. Kuntze
I
Gutes Wasser mit System
Robert-Bosch-Str. 7a
40668 Meerbusch
+49 (0) 2150-7066-0 / Fax -60
www.kuntze.com
74
17.5. Facilitating functions
17.5.1.
Store and load settings via SD card
You can store your settings on an SD card and reload them anytime to ensure that
the settings are not lost during maintenance.
This function can also be used to duplicate settings into other instruments of the
same type and parameter or to recover your settings after a software update or an
upgrade via add-on. Additionally, you can do all settings comfortably on your PC,
using the Kuntze configuration software, and then load the settings into the
instrument via SD card. The configuration software is available free of charge.
17.5.2.
Software-update via SD card
With the SD card you can also install software updates. Copy the two software files
you have received from us onto the SD card (not in a subdirectory). Plug the SD card
in
the
instruments
slot,
and
load the files
via
SYSTEM=>MEMORY
=>LOAD=>SOFTWARE.
17.5.3.
Test menu
During start-up, or in case of an alarm in your control center inconsistent with the
measured values, the test menu will help you test the communication between
instrument and control center.
In the test menu you can operate all relays manually, and set fix values for each
available mA output.
The test menu can only be used in the Manual mode. The test menu is a submenu of
the menu IN/OUT.
Summary of Contents for Neon pR
Page 1: ...Neon pR Dr A Kuntze manual...
