DPtech DPX19000 Series, Installation Manual, Page: 19 / 67

DPtech DPX19000 Series Deep Service Switching Gateway
Installation Manual
Chapter 1 Product introudction 11

Note:

Flashcard is used to store the “Conboot” boot file.

Memory card is used to store system running data and also it can be data-cache when you forward
data packets.

CF card is used to store the software and configuration file of the device.
2. LED indicators
（
3
）
（
6
） （
10
） （
14
）
（
18
）
（
20
）
（
19
）
（
23
）
Figure1-8 N-MPUA (N-MPUA) status LED
LED Status Description
(6)MPU slot status
LED(MPU2)
Off Means no recognizable module inserted in the slot or system
installation isn’t finished.
Green(blink) Means slot module is running and working normally.
Red Means slot module is failure.
(10) LPU slot status
LED(LPU4)
Off Means no recognizable module inserted in the slot.
Green(blink) Means slot module is running and working normally.
Red Means slot module is failure.
(14)FUA slot status
LED(FUA4)
Off Means no recognizable module inserted in the slot.
Green(blink) Means slot module is running and working normally.
Red Means slot module is failure.
(18) PWR status LED
（
PWR3
）
Green Means power supply is working normally.
Red Means power supply is not working normally.
(19)ACT status LED
（
ACT
）
Green Means the main control board is in active status.
Off Means the main control board is in backup status or device isn’t