25
Configure Serial Port
8.1
Serial port configuration
1. To enter configuration setting for the Serial Port, login to the TTY interface and press
C)onfig
>
pr(I)
maryPort
.
2. Press the hot keys to toggle through the following options. (* Indicates default settings:)
NOTE
: Default settings may not reflect the primary interface that shipped in the unit.
·
Port Type
: 232*, 485, 202
·
Baud
: 115200*, 57600, 19200, 9600, 4800, 2400, 1200
·
Parity
: None*, even, odd
·
Flow control
: None*, hardware
·
Stop bits
: 1*, 2
3. Set the RTS head / tail if using 202. (Carrier time) Suggested settings are: head=60; tail=40; 0,0 if
using RS232.
