DP Megacontrol Series, Installation And Operating Instructions Manual

Page: 7 / 72

7
4 Safety and environment
4.1 General
This DP-Pumps product has been developed using
state-of-the-art technology and is manufactured with
utmost care and is subject to continuous quality
control.
DP-Pumps does not accept any liability for damage or
injury caused by not following the directions and
instructions in this manual or by carelessness during
the installation, use or maintenance of the product.
Non-compliance with the safety instructions can
jeopardize the safety of personnel, the environment
and the product itself. Non-compliance with these
safety instructions will also lead to forfeiture of any
and all rights to claims for damages.
Non-compliance can result in:
•
failure of important pump/system functions,
•
failure of prescribed maintenance or service,
•
injury caused by electrical, mechanical and
chemical effects,
•
leakage to the environment of hazardous
substances,
•
explosions.
Depending on the application, extra safety measures
may be required. Contact DP-Pumps if a potential
danger arises during use.
ATTENTION
The owner of the product is responsible
for compliance with the local safety
regulations and internal company
guidelines.
ATTENTION
Not only must the general safety
instructions laid down in this chapter
on "Safety" be complied with, but also
the safety instructions outlined under
specific headings.
4.2 Environmental aspects
4.2.1 General
This product of DP-Pumps is designed to function in
an environmentally friendly way during their entire life.
ENVIRONMENTAL INSTRUCTION
Always act according to the laws, by-
laws regulations and instructions with
respect to health, safety and the
environment.
4.2.2 Dismantling
Dismantle the product and dispose of it in an
environmentally friendly way. The owner is
responsible for this.
ENVIRONMENTAL INSTRUCTION
Ask at the local government about the
re-use or the environmentally friendly
processing of discarded materials.
ENVIRONMENTAL INSTRUCTION
All components of the Megacontrol are
manufactured in accordance with RoHS
II directive 2011/65/EU.