Dovre ASTRO 3CBP, Installation Instructions And Operating Manual

Page: 36 / 205

If you detect damage caused during transport
or any other damage or defects, do not use the
appliance and notify the supplier.
Remove the removable parts (fire-resistant inner
plates, fire grate, top plate, ash pan) from the
appliance before you start installing the appliance.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
1. Open the door; see the following figure.
2. Remove the fire-resistant inner plates; see the
following figure.
Vermiculite inner plates are light and tend to be
ochrous in colour on delivery. They insulate the
combustion chamber to boost combustion.
Cast iron inner plates protect the combustion
chamber and dissipate heat to the
surroundings.
Removable internal sections
astro3 series
1 03.77091.002 Fire basket front
2 03.77092.002 Fire basket left
3 03.77093.002 Fire basket right
4 03.77378.100 Vermiculite inner plate
5 03.05404.020 Ash removal port
6 03.66531.100 Bottom of the fire compartment
astro4 series
1 03.77091.002 Fire basket front
2 03.77095.102 Fire basket left
3 03.77096.102 Fire basket right
4 03.77378.100 Vermiculite inner plate
5 03.05404.020 Ash removal port
6 03.66531.100 Bottom of the fire compartment
7 03.35210.000 Corner piece
4. Remove the ash pan; see the following figure.
6
Subject to change because of technical improvements