7
User Instructions
7.2 Place the rear log into position between the rear brackets
and pushed up against the back panel, see Diagram 6.
Log 1
6
7.3 Place the second log into the left hand groove on the burner
tray, see Diagram 7.
The log should butt up against the raised molding and the
left hand side liner.
Log 2
7
7.4 Place the third log into the groove on the right hand side,
see Diagram 8 .
The log should butt up against the raised molding and the
right hand side liner.
Log 3
8
7.5 Once the logs are in there are two embers which can be
loosely placed at the front of the fuel bed and cover the tabs
securing the burner tray, see Diagram 9.
Embers
9
7.6 Use some of the Embaglow provided and cover the ports in
the burner tray with a liberal amount of fibres, see Diagram 10.
It is essential to cover the port in the middle of the
burner tray in order to get the most visually appealing
flame picture.
NOTE: It is not necessary to use all of the Embaglow.
It is essential to
cover the
central port
Embaglow
10
7.7 Fix log bar into position, see Diagram 11.
11
Summary of Contents for 280
Page 28: ...E O E ...
