Dover TWG PULLMASTER PH50, Instructions And Parts Manual

Page: 28 / 33

PAGE 26
DESCRIPTION
800 1 21390 MOTOR ADAPTOR
801 1 25310 O-RING -012 3/8"ID 1/16"CS
802 1 * *
803 1 25370 PIPE PLUG 1/16 - 27 NPT
804 1 * *
805 2 25040 PIPE PLUG 1/8 - 27 NPT
807 1 * *
809 1 * *
821 12 25118 CAPSCREW - HEX HEAD 3/8 - 16NC X 1.25 GRADE 5
823 12 25037 LOCKWASHER 3/8"
861 1 25724 GEAR HOUSING
865 4 25326 DOWEL PIN
869 2 25612 SEAL - BODY
870 1 21758 PORT END COVER SUB-ASSY WITH PLUGS
875 4 25723 NEEDLE BEARING
877 2 25722 SEAL - RING
881 1 25728 GEAR SET -097 (2" GEAR WIDTH)
885 2 25725 THRUST PLATE
887 12 25656 SEAL - POCKET
899 2 25031 PIPE PLUG 1/4 - 18 NPT
929 1 * *
950 1 ** SUB-ASSY MOTOR -097 (2" GEAR WIDTH)
951 4 25324 CAPSCREW - HEX HEAD 5/8 - 11NC X 5.25 GRADE 5
953 4 25325 WASHER
955 2 25557 PLASTIC CAPLUG 1.625" - 12 THREADED
23121 MOTOR SEAL KIT, CONTAINS ITEMS:
869, 877 AND 887
* These parts vary according to Brake Code. Refer to APPENDIX B.
** ITEM 950, MOTOR SUB-ASSY, CONTAINS ITEMS:
800, 802, 803, 804, 805, 807, 809, 861, 865, 869, 870,
875, 877, 881, 885, 887, 899, 929, 951, 953, AND 955
PART NO.
QTY.
ITEM NO.
Refer to PAGE 24 for drive seal kit and PAGE 30 for TYPICAL ASSEMBLY DRAWING.
338 REV.990801
PARTS REFERENCE - MOTOR GROUP