Dover OPW SiteSentinel Nano M2012, Operator'S Manual, Page: 9 / 49

1.4 Default Screen Reactivation
Figure 1-5 Reactivate Default View Inventory Screen
1. When the console has been inactive for a period of time the screen will go blank.
2. Tap the screen with your finger to reactivate it.
3. The Inventory screen comes into view. This is the default view for the Nano® GUI console.
The
Inventory
screen is explained in detail in Section 4, Inventory.
Doc. No.: M2012 Rev.: 3
Page 9 of 49