Dover OPW SiteSentinel Nano M2012, Operator'S Manual, Page: 5 / 49

Section 1 Introduction
1.1 Screen Navigation
Figure 1-1 Screen Navigation
1. Tabs: Push a screen tab to gain access to its sub-screen(s). The selected tab and screen background
will be yellow. Some sub-screens can also show tabs. These will be explained in the sections where
they are used later in this manual.
2. Boxes: Some boxes will show in white. In most instances, you will be instructed to push a white box to
gain access to another screen. You can also gain access to a popup screen that will let you see
controls that you can use to enter information. A gray box shows that the box is not in operation
(another selection on the screen is necessary for the box to become serviceable).
3. Buttons: Some buttons will be used to make a selection from a list. Other buttons will be used to
Save
information or
Apply
settings to the system. A selected button will show in dark blue.
4. Panels: There are two (2) panels that can show on a screen:
a. A
Filters
panel on the left side of the screen shows buttons for general filters related to the
selected Tab.
b. A
Filters
panel on the right side of the screen shows buttons for the tanks in the system by
number.
5. Popups: Popup screens are used as controls to enter information into the system. Instructions will be
given on how to enter the necessary information using the controls seen on the popup.
Doc. No.: M2012 Rev.: 3
Page 5 of 49