Dover OPW SiteSentinel Nano M2012, Operator'S Manual, Page: 11 / 49

Section 2 Getting Started
2.1 Entering the Password
Figure 2-1 Password Keypad
Push the
Settings
tab. The
Enter Password
keypad will pop-up. Enter the password code using the
number keys and push
ENT
to enter. If you make a mistake inputting the number you can clear an entry by
pushing the
CLR
button. The default password is 12345. Changing the default password is described in
Section 3.4, Other Settings.
Doc. No.: M2012 Rev.: 3
Page 11 of 49