T196SV-CV Crude Vapor Recovery Vent
Instruction & Maintenance Manual
Product Description
Civacon’s T196SV-CV Crude Oil Vent is manufactured to withstand high pressure
crude applications. It will open against 35 psi tank pressure. The unique
patent pending dual stage poppet will relieve tank pressure during the 1
st
stage,
allowing for optimal venting during the 2
nd
stage action. It is designed and
tested to take the punishment of crude oil transportation at temperatures from
-40
o
F to 220
o
F (-40
o
C to 104
o
C). A new cap design threads into the top of the
vent which allows for a better seal and eliminates the snap ring on top.
WARRANTY
All parts and products are thoroughly inspected and tested from the time raw
material is received at our plant, until the product is completed. We guarantee
that all products are free from defects in materials and workmanship for a
period of one year from the date of shipment. Any product that may prove
defective within said one year period will, at our discretion, be promptly
repaired, replaced or credit given for future orders. This warranty shall not apply
to any products which has been altered in any way, which has been repaired by
any party other than an authorized service representative, or when such a failure
is due to misuse or condition of use. We shall have no liability for labor costs,
freight costs or any other costs or charges in excess of the amount of invoice
for the products.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED AND SPECIFICALLY THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
WARNING!!
CIVACON
products should be used in compliance with the applicable federal,
state and local laws and regulations. Product selection should be based on
physical specifications and limitations, compatibility with the environment,
and the material being handled.
CIVACON MAKES NO WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE.
TECHNICAL ASSISTANCE
If at any time during the installation a question arises that is not covered in this
manual or with any other applicable documents feel free to call the Customer
Service Department or visit our website at
www.civacon.com.
In the U.S., call 1-888-526-5657
In all other countries, call your local agent.
Manual
This manual contains the inspection, maintenance schedule and instructions
for repairing and replacing parts for the T196SV-CV crude vapor recovery vent.
The following schedule, based on the environmental conditions in the northern
United States, is only a recommendation: Inspection and maintenance intervals
must be adjusted according to use and operating conditions. Compatible with
diesel, bio-diesel, gasoline, ethanol and methanol
NOTE:
All information subject to engineering and/or other changes. All trade names are copyrighted. Patents Pending. ©2018 Civacon. ©2018 Delaware Capital Formation, Inc.
All Rights Reserved. DOVER and the DOVER logo are registered trademarks of Delaware Capital Formation, Inc., a wholly-owned subsidiary of Dover Corporation.
www.civacon.com
9393 Princeton-Glendale Road
Hamilton, Ohio, USA 45011
Phone: (800) 560-6601
12831PA
RevA Apr2021
