Complete 101 Series Installation Manual
99-25517-I001 July 2022 Rev. B
64 |
P a g e w w w . a n t h o n y i n t l . c o m
Section 16 - Torque Master Replacement
The following instructions will guide you on how to remove and replace Torque Master from the frame.
PROTECTIVE GEAR NOTICE
Protective Eyewear– Potential risk of eye injuries, protective eyewear required when
performing this, and any other associated tasks.
Protective Gloves– Potential risk of injury to your hands, protective gloves required when
performing this, and any other associated tasks.
Footwear Protective – Potential risk of injury to your feet, wearing protective footwear is
required when performing this and any other associated tasks.
1.
Once the first door is removed, proceed to remove, and replace Torque Master.
2.
Insert a flat head screwdriver into the Torque Master and turn Counterclockwise to disengage and remove the old Torque Master
as shown in Figure 16.1.
3.
Next, place the new Torque Master into the opening in the frame, and using a flathead screwdriver turn Clockwise to lock Torque
Master in place.
Figure 16.1: Torque Master Replacement
4.
Ensure that Torque Master is secure before proceeding.
