Douglas Industries, Inc.
3441 S 11th Ave., Eldridge, Ia 52748
1-800-553-8907 Fax: 1-800-443-8907
[email protected] douglas-sports.com
Pro-656
Installation Instructions
! SAFETY INSTRUCTIONS !
Failure to follow these instructions may result in injury or property
damage.
Owner must ensure that all players know and
follow these rules for safe operation of this system.
The longivity of your Basketball system depends on many
conditions such as: the location, the climate, and any exposure
to corrosives.
DO NOT HANG on the rim or any part of the system.
Do not climb, slide, shake or play on pole.
When adjusting height be careful of moving parts.
Do not allow children to move or adjust system. Adult supervision
is recommended.
Serious injury could occur during play activity if teeth/face come
in contact with backboard, net, or rim.
During play, do not wear any jewelery or objects that may get
caught in the net.
Keep pole cap on pole at all times.
If technical assistance is required please contact Douglas
Industries
To ensure safety, please follow the instructions while assembling
this system. Proper and complete assembly is essential to ensure
for the operation and safety of this system. To reduce any serious
injury this system should be properly installed, maintained, and
operated. Before beginning, please read and understand the
directions.
Suggested Tools and Materials:
2-3 people
Socket Wrenches:
9/16”, 3/4”, and 15/16”
Open End Wrenches:
9/16”, 3/4” and 15/16”
Small phillips screw driver
Tape Measure
Shovel and post hole digger
Concrete and container mix
2- Ladders
Carpenters Level
Parts List:
Step One: Template and Basketball Pole
4- Anchor Bolts
1- Template
8- 5/8” Zinc hex nut
4- 5/8” Locknut with nylon insert
8- 5/8” Zinc flat washers
Base pole
Pole cap
4- Rebar
Step 2: Extension Arm and Crank System
1- 1/2” x 10” bolt
2- 1/2” x 12” bolts
1- 1/2” x 4-1/2” bolt
10- 1/2” Flat washers
14- 1/2” Nylon washers
4- 1/2” Nylon lock nuts
1- Steel spacer
1- Upper extension arm
1- Lower extension arm
1- Adjustable crank
5- Height decals
Step 3: Backboard and Rim
Backboard
Goal Box (everything is included)
2- 1/2” x 4 1/2” bolts
2- 1/2” x 3 1/2” bolts
12- 1/2” Nylon washers
8- 1/2” Steel washers
4- 1/2” Nylon lock nuts
