Lit. No. 96582, Rev. 00
1
April 1, 2016
A DIVISION OF DOUGLAS DYNAMICS, LLC
Western Products
PO Box 245038
Milwaukee, WI 53224‑9538
www.westernplows.com
WARNING
To prevent accidental movement of the blade,
always push the ON/OFF button to switch the
control OFF whenever the snowplow is not in
use. The power indicator light will turn OFF.
CONTROL OVERVIEW
Each control is equipped with an ON/OFF button and
an indicator light to show when the control is powered
ON or OFF. The controls are powered by the vehicle's
battery, so your vehicle ignition (key) switch must be
ON to use the controls.
Install the control as stated in the Hand‑Held Control
Kit Installation Instructions, and check all snowplow
functions described in the following pages.
RAISE
LOWER
R
L
ON/OFF
FLOAT
1
3
2
4
S C O
O
P
R
E
T
R A C T
W
IN
G
W I N
G
Power Indicator
Light (red)
ON/OFF
Button
(Emergency
Stop)
FLOAT Light
(green)
RAISE
LOWER
R
L
ON/OFF
FLOAT
1
3
2
4
S C O
O
P
R
E
T
R A C T
W
IN
G
W I N
G
Buttons numbered 1, 2, 3, and 4 control
SECURITY GUARD™ System functions.
85200, 96500 – CabCommand
HAND-HELD CONTROL for the
FLEET FLEX Electrical System
Operating Instructions
