VTAP50 OEM MODULE INSTALLATION GUIDE
PAGE 5
3.3 Mounting points
The PCB has 2.7mm diameter mounting holes for fixing the unit. Use 2-4 small nuts and
bolts to mount the board securely.
Figure 3-2 VTAP50 PCB mounting holes - v1 Hardware
The user’s smartphone should be able to tap within 10mm of the antenna on the PCB. The
antenna position should be clearly marked and easily accessed, so that users can position
their smartphone appropriately. Be aware that antennas are positioned differently in
different makes of smartphone. Apple iphones often have antennas near the top and
Android phones are more likely to have an antenna in the middle.
