VTAP100-USB INSTALLATION GUIDE
© DOT ORIGIN
PAGE 2
2 How the VTAP100 works
With the VTAP100-USB connected to a PC, simply tap your smartphone against the
VTAP100. Your mobile NFC pass will be read and data sent to the connected PC.
Of course, the data can only be read if your phone contains a mobile NFC pass, which has
been issued in connection with the Merchant ID(s)/Collector ID(s) and key(s) that are known
to the VTAP100. The unit comes with default values, so that you can test
before you begin customising any settings.
When the VTAP100-USB is connected to a computer it appears as a generic mass storage
device (like a memory stick). To configure your VTAP100, you simply edit or create text files.
These will be read automatically, and control the operation of the VTAP100. There is
information in
to take the first steps towards reading your
own passes. Consult the VTAP Configuration Guide for more detail.
By default the VTAP100 is fully upgradable in the field. However, the VTAP100 can be locked
in software or hardware, before deploying the unit, so that operation is no longer easily
changed.
VTAP MOBILE WALLET READERS