Dot Hill Systems SANnet II 200, Installation, Operation And Service Manual

Page: 86 / 186

7-2 SANnet II 200 SCSI Array Installation, Operation, and Service Manual • June 2005
FIGURE 7-1 SANnet II 200 SCSI Array Enclosure Device Orientation
The enclosure sensor locations and alarm conditions are described in the following
table.
Table 7-1 Sensor Locations and Alarms
Sensor Type Description Alarm Condition
Fan 0 Left side power supply fan < 900 RPM
Fan 1 Right side power supply fan < 900 RPM
PS 0 Left side power supply Voltage, temperature, or fan
fault
PS 1 Right side power supply Voltage, temperature, or fan
fault
Temp 0 Left drive temperature sensor < 32 ° F (0 ° C) or > 131 ° F
(55 ° C)
Temp 1 Center drive temperature
sensor < 32 ° F (0 ° C) or > 131 ° F
(55 ° C)
Temp 2 Temperature sensor on left
side power supply module < 32 ° F (0 ° C) or > 140 ° F
(60 ° C)
Temp 3 Temperature sensor on left
side EMU module < 32 ° F (0 ° C) or > 140 ° F
(60 ° C)
Temp 4 Temperature sensor on right
side EMU module < 32 ° F (0 ° C) or > 140 ° F
(60 ° C)
Temp 5 Right drive temperature
sensor < 32 ° F (0 ° C) or > 131 ° F
(55 ° C)
Front of array
Right side
Left side
Fan 0
Power supply 0
Power supply 1
Fan 1