Dot Hill Systems SANnet II 200, Installation, Operation And Service Manual

Page: 145 / 186

Appendix E Configuring a Solaris Server E-9
6. Type
label
and answer
y
when prompted to continue.
Note –
For further information on partitioning, see the Solaris
format
(1M) man page.
E.5 Making JBODs Visible to Solaris Hosts
If the JBOD cabling is correct and the drives are still not visible, run the
devfsadm
utility to rescan the drives. The new disks can be seen when you perform the
format
command.
If the drives are still not visible, reboot the host(s) with the
reboot -- -r
c
ommand so that the drives are visible to the host.
AVAILABLE DRIVE TYPES:
0. Auto configure
1. Quantum ProDrive 80S
2. Quantum ProDrive 105S
3. CDC Wren IV 94171-344
4. DotHill0104
5. DotHill0207
6. DotHill0327
7. DotHill0340
8. DotHill0424
9. DotHill0535
10. DotHill0669
11. DotHill1.0G
12. DotHill1.05
13. DotHill1.3G
14. DotHill2.1G
15. DotHill2.9G
16. DotHill-3310-0100
17. other
Specify disk type (enter its number)[16]: 0
c1t1d0: configured with capacity of 33.34GB
<DotHill-SANnet II 200-0200 cyl 34145 alt 2 hd 16 sec 128>
selecting c1t1d0
[disk formatted]
format> label
Ready to label disk, continue? y