9.3.4 Replace handle
Personnel:
Operator
+ additional qualification high tension
technology
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Anti-Static Safety Boots
Disassembly
Fig. 36: Replace handle
1. Loosen screws (3) using a hexagon
socket wrench.
2. Remove connecting piece (2).
3. Disconnect cable (1).
Fig. 37: Replace O-rings of the handle
4. Replace O-rings (4, 5).
Assembly
5. Grease new O-rings (4, 5).
6. Insert cable (1).
7. Insert connecting piece (2).
8. Insert and tighten screws (3).
Tightening torque: 1Nm
Faults
11/2019
EcoGun AS MAN EC - MSG00022EN
30/52
