Doro Primo 215, Operating Instructions Manual, Page: 51 / 80

47
Phone lock
If the telephone lock is activated, you need the tele-
phone lock code to turn on the phone. To do this, you
must enter the lock code (factory default 0000). You
can change this lock code (see below).
1. Press
Menu , scroll to Settings and press OK .
2. Select Security and press OK .
3. Select Phone security and press OK .
4. Select Phone lock and press OK .
5. Enter the lock code and press OK .
6. The following message will inform you whether the
telephone is locked ( locked ) or not ( unlocked ).
Change password
Change the lock code for the telephone lock (factory
default 0000).
1. Press
Menu , scroll to Settings and press OK .
2. Select Security and press OK .
3. Select Phone security and press OK .
4. Select Change password and press OK .
5. Enter the old lock code and press OK .
6. Enter the new lock code and then confirm it again.
Downloaded from www.vandenborre.be