Doro Primo 215, Operating Instructions Manual, Page: 10 / 80

6
1. Remove the cover from the battery compartment
by sliding your fingernail into the small notches on
the side of the bottom of the phone and pulling the
cover upward.
If the battery is installed, slide your fingernail in the
notch next to the lower end of the battery and lift
one side of the battery to remove it.
2. Insert the SIM card by carefully sliding it beneath
the metal bracket. Make sure that the contacts on
the SIM card are facing down and the cut-off edge
is aligned with the depressed shape of the bra-
cket. The contacts of the SIM card must not be
scratched or bent. If possible, do not touch the
contacts with your fingers.
3. Micro-SD card
To use the storage-intensive features of your tele-
phone, in particular sounds, etc., a micro-SD card
must be used.
This is how to insert the memory card into the slot:
Press lightly on the card holder and push it care-
fully toward the right edge of the casing. The
memory card bracket can now be flipped up verti-
cally. Place the memory card positive-locking into
the black plastic bracket. Make sure that the
memory card contacts are facing down and that
Downloaded from www.vandenborre.be