Doro COMFORT 1005, Manual

Page: 10 / 20

English
Base settings (BS SETTINGS)
1. Press . Select BS SETTINGS . Press OK .
2. Select function e.g. BS RINGER . Press OK .
3. Enter desired setting. Press OK .
BS RINGER Select ringertone for the base unit. Press OK to confirm.
RING VOLUME Base unit ringer signal.
Select ringer signal for INT. RING (internal calls) and for EXT.
RING (external calls).
Base unit ringer volume.
1 = lowest, 5 = highest, or VOLUME OFF . Press OK to confirm.
The base unit’s ringer signal can be adjusted.
DELETE HS
To de-register a handset.
FLASH TIME Recall time.
LONG =New Zeeland.
MEDIUM =France/Portugal.
SHORT =others including UK/AUS.
CHANGE PIN The code (default 0000) can be changed.
Note!
A de-registered handset can no longer be used with the system!
Expanded system (two or more handsets)
The call number for internal calls will be displayed in standby. The base unit
should be positioned centrally so that the coverage area is roughly equal for
all handsets.
Register a new handset
All handsets included in the package are already registered to the base unit.
You can register up to 5 handsets to one base unit.
Note!
This model is GAP (Generic Access Profile) compatible, which means that the
handset and the base unit can both be used with most other GAP compatible
units irrespective of manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed.
1. Hold down
J
on the base for around 6 seconds.
2. Press . Select REGISTRATION . Press OK .
3. Select the base unit you wish to register. Press OK .
6