English
Note!
This device has a Li-Ion type of battery, that can age faster if kept in the charger for a
prolonged time after it’s fully charged. In order to ensure a longer lifetime for the battery, the
device will stop charging shortly after it’s fully charged. Charging will resume when it has been
discharged to 75 % of a full charge. This means that the battery may not be fully charged even after
the device has been placed in the charger for a long time. This is not a fault, but with sustainable
development a way to preserve energy and natural resources by extending the battery lifetime.
You can still leave the device in the charging cradle, when not used, but normally it should be
enough with a couple of hours of charging every third day.
Save energy
To save power, the screen turns off after a while. Press any button to wake the screen up. Full bat-
tery capacity will not be reached until the battery has been charged 3–4 times. Batteries degrade
over time, which means that call time and standby time will normally decrease with regular use.
During extended operation, the device may feel warm. In most cases, this is normal. To save battery
and energy even further, see
Turn the phone on and off
1.
Press and hold
on the phone to turn it on or off. Press
OK
to
Power off
.
2.
If the SIM card is valid but protected with a PIN code (Personal Identification Number),
Enter
SIM PIN
is displayed. Enter the PIN code and press
OK
. Delete entries with
.
Attempts
shows the number of PIN attempts left. When no more attempts remain, the SIM card
must then be unlocked with the PUK code (Personal Unblocking Key).
Unlock with PUK code
1.
Enter the PUK code and press
OK
. Delete entries with
.
2.
Enter a new PIN code and press
OK
.
3.
Re-enter the new PIN code and confirm with
OK
.
Note!
If PIN and PUK codes were not provided with your SIM card, please contact your service
provider. If you enter the wrong PUK code more than 10 times the SIM card gets permanently
locked.
Get to know your phone
Start-up Wizard
When starting the device for the first time, a Start-up Wizard will be initiated to set some basic
settings.
1.
Select the wanted language, the standard language is selected by the origin of the SIM card,
and press
OK
.
2.
You will be provided a tutorial about the navigation of the phone. Press
Next
/
OK
to step
through the tutorial. Press
Skip
to skip pass the tutorial. Press
to step backward.
3.
Select:
•
Standard setup
to use the phone with the standard settings.
•
Manual setup
to customise the settings.
You can choose to adjust one or more settings by selecting and pressing
OK
.
Select
Finish
when done.
4.
You will be provided a short tutorial of the phone’s menu. Press
Next
/
OK
to step through the
tutorial.
4
Summary of Contents for 7000H
Page 1: ...English Doro 7000H ...
Page 43: ...English 39 ...
