Dorner AquaPruf 76P1 Series, Installation, Maintenance, And Parts Manual

Page: 21 / 52

851-946 Rev. A 21 Dorner Mfg. Corp.
AquaPruf® Positive Drive Conveyors
Preventive Maintenance and Adjustment
Standard Drive Tail
1. Loosen the four screws (Figure 52, item 1) . Rotate and
remove the gearmotor. (For further detailed instructions,
refer to drive package manual 851-947.)
Figure 52
Figure 52
2. Remove limiter. Refer to “Limiter Replacement” on
page 15.
3. Remove conveyor belt. Refer to “Conveyor Belt
Replacement” on page 15.
4. Remove the headplate screws (Figure 53, item 1) on
both sides of the conveyor.
Figure 53
Figure 53
5. Remove drive tail assembly (Figure 54, item 1) .
Figure 54
Figure 54
6. Remove bearing cover (Figure 55, item 1) .
Figure 55
Figure 55
7. Loosen two set screws (Figure 56, item 1) .
Figure 56
Figure 56
1
1
1
1
1
1