manualshive.com logo in svg

Dormakaba TP/TA EASY Safe, Mounting Instructions, Page: 5 / 20

Share
Download
Dormakaba TP/TA EASY Safe Mounting Instructions Download Page 5

5

TP/TA EASY Safe

2020-11

dormakaba mounting instructions

Product description

WN 060028 45532

3.2  Variants

•  1 and 2-panel
•  in all-glass system, without rebate
•  in door frame with/without rebate
•  with free glass edge

3.2.1  Variants

•  Door rail for double-action doors
•  Door rail for single-action doors

3.2.1.1  Door rail for single-action doors

Single-action doors always have a stop:
•  in the form of a door frame 
•  in the form of a suitable end cover

3.3  Components

Depending on the order, the top and bottom pivot 
points are pre-mounted in the door rail.

3.3.1  Top pivot points

•  Top frame center ES
•  Top insert ES
•  Top insert ES for RTS frame door closer
•  Top insert, two part ES, special version

3.3.2  Bottom pivot points

•  Floor bearing ES for damp environments without 

floor inlet with insert for double-action door rail

•  Bottom frame center ES for floor bearing
•  Bottom steel door strap ES with spindle for FDC
•  Bottom steel door strap ES, suitable for flat 

tapered spindle for FDC and floor bearing

•  Bottom insert for round or flat tapered spindle

3.3.3  250 mm lock module

•  Side-locking deadlock, PZ
•  Floor-locking deadlock, PZ and electric strike release
•  Latch lock, PZ
•  Electric strike release
•  Strike box
•  Latch lock and floor-locking deadlock, PZ
•  Floor-locking deadlock, PZ with micro switch

3.4  Accessories

Mount the accessories in accordance with the 
enclosed manuals
.

Ceiling connection

Art.:

PT 25 pivot with plug

01.115

PT 24 pivot with fixing plate 6 mm

01.116

PT 21 frame portion top center

01.117

PT 21 with cover

01.118

PT 24 pivot with fixing plate 3 mm

01.123

Top pivot bearing

01.129

Top pivot bearing

01.130

Top pivot bearing steel fixing plate

01.131

Top pivot bearing aluminum fixing plate

01.132

Floor connection

Art.:

Floor bearing

01.106

FDC 84 (80) -75V

Floor bearing with flat-tapered spindle

04.602
04.603

Summary of Contents for TP/TA EASY Safe





















Reviews:

No comments