WN 059734 45532 – 2018-11
DE
SLI-A Interlock
Installation manual
Contents
Parameterization of system doors with TMS
Soft®
Configuration of an interlock with TMS Soft®
LED display on the illuminated ring
1
About this document
1.1 Contents and purpose
This document describes the installation of the SLI-A
Interlock application.
1.2 Target group
This document is intended for assembling technicians
and specialists authorized for installation by
dormakaba.
1.3 Other applicable documents
• The SCU control units’ mounting instructions
• The SafeRoute® system manual
• The respective door units’ inspection log
• The TMS Soft® handbook
1.4 Documents storage
This document must be handed over to the facility
operator after commissioning.
1.5 Symbols used
1.5.1 Hazard categories
WARNING
This signal world indicates a possible
hazardous situation which may result in
death or severe injuries if ignored.
ATTENTION
This signal word indicates a situation of
potential risk, which could lead to damage
to property or the environment if not
averted.
1.5.2 More symbols
TIPS AND RECOMMENDATIONS
This signal word indicates useful information
for efficient and trouble-free operation.
2 Safety
2.1 Intended use
The functional scope of a SafeRoute® system is
extended by loading the application into the control
unit.
2.2 Personnel qualification
Installation may only be carried out by persons
authorized by dormakaba.
3 Product description
With the SLI-A interlock application, a SafeRoute®
Control Unit can operate up to 4 independent doors
with different configurations in 1 interlock. The system
cabling takes place via DCW® bus. The SLI-A Interlock
includes all functions of the SLI-A Multi-door.
The loaded applications are permanently stored on
the SLI license card. After replacement of the SLI
license card, any necessary applications must be
reloaded.
