Installation
Technical Manual
23
1220013692 - 11/2017
dormakaba digital cylinder
10
10.
Put the inner door knob on to the cylinder housing.
11
11.
Push the securing shackle into the knob module from
above until it stops.
The knob module and cylinder housing are then firmly con-
nected.
13
12
12.
Remove the contact protection film.
13.
Note:
Be careful not to tilt the edge of the knob when installing.
Push the outer door knob over the door knob module.
14
15
14.
Position the multitool on the outer door knob.
15.
Turn the multitool to the left and lock it.
The outer door knob and the cylinder housing are now
firmly connected.
16
16.
Tighten the forend locking stud.
17
17
17.
Check that the door knobs function correctly. Both door
knobs can be turned without touching the fittings.
18.
Check the backset.
The door knobs must not knock against the door frame.
