Installation
Technical Manual
17
1220013692 - 11/2017
dormakaba digital cylinder
4 Installation
This chapter describes the installation of the product.
4.1
Requirements
4.1.1
Door components
Locking cylinder
The locking cylinder with Euro profile or round profile can be used in any door made from
wood, glass or metal, in accordance with the cylinder perforations.
A notch is required for the locking cylinder with the
anti-panic round profile cylinder
as this
has a pin going all the way through on the inside (LB).
The locking cylinder with the
Euro profile cylinder and dual round profile cylinder
, in the pro-
tected version (VdS class BZ+) only offers high anti-drill protection on the outside (LA).
WARNING
Risk of personal injury or death.
•
Improper use or incorrectly installed digital cylinders can lead to emergency exit locks or
panic door locks and doors not opening.
•
The use of a digital cylinder must be checked carefully before using it in locks with a panic
function.
•
Before installing the digital cylinder in an escape door, a check must be carried out to en-
sure that the function of the lever handle or the panic push bar is not obstructed by the
inside knob.
•
The use of a digital cylinder in emergency exit locks in accordance with EN 179 or in panic
door locks in accordance with EN 1125 is documented in the lock manufacturers' perform-
ance declarations. If the digital cylinder is not listed in the performance declarations or
certificates from the lock manufacturer or the lock does not comply with these standards,
an EC conformity inspection of the lock, digital cylinder, fitting and assembly accessories
as one unit must be carried out.
NOTICE
Danger of damage to electronic components from electrostatic discharge.
Improper handling can damage or destroy electrostatically sensitive circuit board compon-
ents.
•
Observe and apply general ESD protective measures.
Check the dimensions
The following dimensions are to be checked prior to installation:
