Dormakaba BEST Wi-Q ONGUARD, Interface User Manual, Page: 27 / 168

27
Figure 8 Connecting the Wi-Q Gateway to Power and Ethernet Connections.
Note
If no protected area is available, consider positioning the Wi-Q Gateway inside a locked
enclosure designed for that purpose. Contact your dealer for more information.
Installing a Wireless Access Controller
The Wi-Q Technology Wireless Access Controller (WAC) provides an optional, cost
effective way to retrofit an existing hard-wired application, or where the installed controller
may be obsolete or unable to handle additional controller inputs. It supports Wiegand-
compatible keypad controllers and is configured and monitored in the Wi-Q Interface
Software, just like a standard controller.
Note Please check with your dormakaba representative for a list of compatible controllers.
Using the Wireless Access Controller (Figure”Wireless Access Controller.” on page 28 ),
you can add controllers or other I/O devices to an overall wireless solution without the high
cost of installing hard-wire such as RS485 or CAT5 to the controller. You can position the
controller at the door or where suitable above the ceiling tile.
Ethernet Connection
Power
Port
LED