manualshive.com logo in svg

Dormakaba 9230-K7, Technical Manual

Share
Download
Dormakaba 9230-K7 Technical Manual Download Page 20

Product description

Technical Manual

20

04048135 - 2020/10

dormakaba access manager 92 30

9230-K7, TP4-Client

•

2011/65/EU ‒ Restriction of Hazardous Substances (RoHS)

UL/CSA

This product complies with the following standards.

•

UL62368-1:2014-12

•

CAN/CSA-22.2 No. 62368-1:2014-12

3.6

Open source information

The firmware contains packages that are subject to open source licenses.

dormakaba provides the following legal information for each firmware version.

•

List of open source packages

–

Name and version of the packages

–

Name and version of the licenses

•

Detailed information on the individual packages

–

Detailed license texts

–

Information on copyright

The legal information can be accessed via the following.

•

dormakaba extranet

The firmware and the legal information are packed in a ZIP file.

•

Accessing the device via browser/console program

Disclaimer
In accordance with the conditions of the open source licenses, dormakaba points out that the
developers of packages have excluded any liability and warranty for the packages and their
properties. The details are available in the respective license conditions.

By pointing out this exclusion of liability, dormakaba exclusively fulfils the license conditions of
the packages. Legal and contractual claims against dormakaba are not affected by this ex-
clusion of liability.

Summary of Contents for 9230-K7






























































Reviews:

No comments

Brands by name

Popular brands

Load more brands