8 Service
8.1 EAC Service Tool
The EAC Service Tool is an auxiliary program for updating firmware data and for diagnoses.
The EAC Service Tool can also be started directly (the system software must not have already
been started up).
Path: Start/All Programs/Kaba/Kaba EAC Service Tool.
Programmer 1364
Wizard for updating the programmer firmware.
Programmer 1460
Wizard for updating the programmer firmware.
Actuators firmware
Wizard for transferring the firmware for the components to the
programmer.
Desktop reader 91 08
LEGIC/MIFARE/MRD
Wizard for updating the desktop reader firmware for the selec-
ted technology.
Programmer 1460 memory
image
Wizard for creating a ZIP file with the memory content of the
programmer. A tool for problem-solving in support cases.
Actuator memory image
(V4)
Wizard for creating a ZIP file with the memory content of the
component. A tool for problem-solving in support cases.
The firmware must be downloaded from the internet/extranet onto a local hard disk before
updating.
Service
User Manual
44
- 06/2021
dormakaba Programmer 1460
