5.3 Export to components
During the export, the configuration data is transferred from the programmer to the
components.
For an export, configuration data for the key plans must first be transferred from the system
software to the programmer.
5.3.1 Export to evolo components
Select the configuration data from the list in the programmer and export them to the
components.
ü
Valid master medium available
1.
Press the 'Export' menu key.
ð
The 'Export' menu opens.
2.
Log the master in to the component.
Activate the electronics on cabinet lock 21 10 by pressing briefly on the door.
3.
Choose a key plan.
4.
Press the ENTER key.
5.
Choose an actuator.
6.
Press the ENTER key.
5.3.2 Updating evolo components
ü
Valid master medium available
1.
Press the 'Export' menu key.
ð
The 'Export' menu opens.
2.
Log the master in to the component.
ð
Update the configuration.
Activate the electronics on cabinet lock 21 10 by pressing briefly on the door.
3.
Choose 'Next'.
ð
All data are exported to the component.
ð
The component configuration is updated and confirmed.
Programming
User Manual
29
- 06/2021
dormakaba Programmer 1460
