Before starting
D
Read each section carefully before starting. It is very important
that each step is performed in the correct order. If these steps
are not followed in sequence, assembly difficulties will occur.
D
Make sure all parts are included. Most board parts are
labeled or stamped on the raw edge.
D
Work in spacious area, preferably on a carpet, near the place the
unit will be located.
D
Have the following tools close at hand.
D
Do not use power tools to assemble your furniture. Power tools
may strip or damage the parts.
('
HELPFUL HINTS
- Identify, sort and count the parts before beginning assembly.
- Compression dowels should be tapped in with a rubber mallet.
- Slides have a lip on the right side only.
- Back panels provide stability and support.
- Unit may collapse without the back panel installed.
- Clean the product with your choice of furniture polish and a soft cloth.
DO NOT USE harsh chemicals or abrasive cleaners.
- Move your new furniture carefully. Two people are needed to lift and
carry the unit to its new location.
- Never push, drag or scoot your furniture (especially on a carpet).
Cam Lock Fastening System
1
2
3
4
2
Summary of Contents for Elmwood 5048096PCOM
Page 4: ...CX I...
