background image

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE 
BED.

DO NOT USE SUBSTITUTE PARTS.  CONTACT CUSTOMER SERVICE FOR 
REPLACEMENT PARTS.

USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD 
USING THE UPPER BUNK. 

DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.
ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER  BUNK. IF THE BUNK 
BED WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL 
LENGTH OF THE BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT 
ENTRAPMENT BETWEEN THE BED AND WALL (APPLICABLE FOR BUNK BEDS WITH 
FULL LENGTH GUARDRAILS ON ONE SIDE).

ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK.

KEEP THESE INSTRUCTIONS FOR FUTURE USE.

THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.

PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.

PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER 
COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL 
CONNECTORS ARE TIGHT.

USE ONLY COIL SPRING MATTRESSES ON BOTH THE UPPER AND LOWER BUNKS. 
FAILURE TO DO SO CAN RESULT IN INJURY.

USE ONLY MATTRESSES WHICH ARE  74"-75" LONG AND 37 1/2" - 38 1/2" WIDE ON 
UPPER AND ON LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT 
EXCEED 6". SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE 
UPPER EDGE OF GUARDRAILS.

STRANGULATION HAZARD

 - NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE 

BUNK BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT 
NOT LIMITED TO  HOOKS, BELTS AND JUMP ROPES.

ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR 
BOTH, TO HELP PREVENT THE  LIKELIHOOD OF ENTRAPMENT OR FALLS.

FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK 
END STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM 
BED.
THE MATTRESS PLATFORM IS DESIGNED TO SUPPORT A MATTRESS WITHOUT THE 
NEED FOR A POSTURE BOARD OR BOX SPRING.

E-MAIL: [email protected]

   WARNING

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service 
representative first!

CALL 1-800-295-1980 

You can also order parts by writing to the address listed below.  Please include the product 
model number, color and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Montreal, Quebec

Canada, H1G 3L1

Summary of Contents for 0-65857-17958-3

















Reviews: