Place Child Restraint in
Vehicle Rear-Facing in
the Back Seat
Fully recline
the child
restraint.
55
F. Installing Rear-Facing with Vehicle Belts
F-4
Installing Rear-Facing with
Vehicle Belts
Do not use the UAS along with the vehicle lap
or lap/shoulder belt. Secure UAS belts when
using the vehicle belts.
Check the vehicle belt before each use. Use
only if the belt is tightened properly and
securely.
Secure the tether hook to the tether attachment
when used rear-facing.
Fully recline the child restraint and rotate the
child restraint to the correct recline angle that
matches the weight of your child. Do not use any
other recline positions rear facing. Do not rotate
the child restraint beyond the bottom or top level
to ground lines.
Failure to follow these warnings can result in
serious injury or death.
Secure Tether Hook
You
MUST
attach the
tether hook to the tether
attachment as shown.
Tighten tether to remove
the slack.
2.
Secure UAS Belts
You
MUST
fasten the UAS
connectors to the UAS
attachments as shown when
using the vehicle seat belts
1.
56
continued on next page.
4.
Pull Pad Off Corners of
Child Restraint
Pull the seat pad off
the front corners of
shell.
3.
Review section D-4 to determine what kind of vehicle belts you
have. Review your vehicle’s owner manual for seat belt use.
Rotate Child Restraint to
Correct Recline Angle
For children between 2.3-10
kg (5-22 lb), the bottom level
to ground line must be level
with the ground. For children
between 10-18 kg (22-40
lbs) and are able to sit up
unassisted, rotate the child
restraint between the top and
bottom level to ground lines.
NOTE:
Only if needed, you
may use a rolled towel(s)
or foam noodle(s) under the
front of the child restraint
where the vehicle’s seat
back meets the vehicle’s
bench seat to get the correct
recline angle.
5.
4358-5694 Elite Eng.indd 57-58
4358-5694 Elite Eng.indd 57-58
11/16/11 1:24 PM
11/16/11 1:24 PM
