Step 4
Attach the support posts
W
to bottom slats
Y
of the bottom bunk with hex socket head
bolts
❽
, as shown.
Attach a bottom slat
X
to bottom side rails
J
with flat head wood screws
❹
. Make
sure the slat touches the corner posts (as
close to the headboard as possible).
Attach the other slats (
X
&
Y
) to the bottom
side rails J with flat head screws
❹
, using
a Phillips head screw driver (not included).
Use space block
A1
to space them out.
NOTE:
If you notice that any of the slats (
X
&
Y
) are not perfectly flat, be sure to
assemble them so that the slats (
X
&
Y
)
curve up in the middle and down on the
ends.
9
3
X 14
X 3
4
8
14