background image

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

ALWAYS USE THE RECOMMENDED SIZE MATTRESS OR MATTRESS SUPPORT, OR BOTH, TO 
HELP PREVENT THE  LIKELIHOOD OF ENTRAPMENT OR FALLS.

USE ONLY MATTRESSES WHICH ARE  74"-75" LONG AND 37 1/2" - 38 1/2" WIDE ON UPPER AND ON 
LOWER BUNKS. ENSURE THICKNESS OF MATTRESS DOES NOT EXCEED 6". SURFACE OF 
MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.

DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.

ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK.

ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER  BUNK. IF THE BUNK BED 
WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL LENGTH OF THE 
BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT ENTRAPMENT BETWEEN THE BED 
AND WALL (APPLICABLE FOR BUNK BEDS WITH FULL LENGTH GUARDRAILS ON ONE SIDE).

PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER 
COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL 
CONNECTORS ARE TIGHT.

DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED.

MAXIMUM WEIGHT CAPACITY: 165 LBS (75 KGS) PER LEVEL.

DO NOT USE SUBSTITUTE PARTS.  CONTACT CUSTOMER SERVICE FOR REPLACEMENT PARTS.
USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD USING THE 
UPPER BUNK. 

E-MAIL: [email protected]

   WARNING

STRANGULATION HAZARD

 - NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE BUNK 

BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT NOT LIMITED TO  
HOOKS, BELTS AND JUMP ROPES.
FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK END 
STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM BED.

PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.
KEEP THESE INSTRUCTIONS FOR FUTURE USE.

THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.

THE MATTRESS PLATFORM IS DESIGNED TO SUPPORT A MATTRESS WITHOUT THE NEED FOR A 
POSTURE BOARD OR BOX SPRING.

USE ONLY COIL SPRING MATTRESSES ON BOTH THE UPPER AND LOWER BUNKS. FAILURE 
TO DO SO CAN RESULT IN INJURY.

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service representative 
first!

CALL 1-800-295-1980 

You can also order parts by writing to the address listed below.  Please include the product model number, 
color and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Montreal, Quebec

Canada, H1G 3L1

Summary of Contents for 0-65857-15700-0


















Reviews: