DOPOD 838PRO, User Manual, Page: 369 / 376

Appendix
A
359
ETSI EN 301 908 – Electromagnetic compatibility and Radio spectrum Matters
(ERM); IMT-2000 third generation mobile network base station and user
equipment.
EN 50360 : 2001 – 2001 – Product standard to demonstrate the compliance
of mobile phones with the basic restrictions related to human exposure to
electromagnetic fi elds (300 MHz - 3 GHz.
EN 50371 : 2002 – 2002 – Product standard to demonstrate the compliance
of mobile phones with the basic restrictions related to human exposure to
electromagnetic fi elds (10 MHz - 300 GHz.
FCC Notice
This device complies to FCC regulations rule 15. During operation, the following two
conditions must be met: 1. This device will not generate hazardous interferences;
2. This device must accept any received interferences, including operation-affecting
interferences.
This equipment is tested and verifi ed to comply with FCC Rules Part 15, on Class
B digital device regulations. The regulations point to hazardous interferences
caused to installation in residential areas, providing reasonable protections. This
equipment will generate, use, and radiate radio frequency energy. If not installed
and used according to directions, may cause damaging interferences to wireless
communications. However, this does not guarantee that no interferences will
be generated under a specific installation. If the equipment causes damaging
interferences to wireless or TV reception, turnoff and then restart power to
equipment to solve the issue. It is recommended that the user to fi x the interference
issues by the following methods:
• Re-adjust antenna orientation and location.
• Increase distance between equipment and receiver.
• Plug the equipment to a socket of different power panel than the receiver.
• Please request assistance with your distributor or an experienced wireless or TV
technician.
Modifi cation
FCC urges users to take note, any unauthorized changes and modifi cations made
to the equipment without the consent of High Tech Computer Corporation, may
invoke the user privileges to operate the equipment.
Wireless Frequencies Exposure Safety Precautions
The SAR value testing is to be performed under FCC specifi ed standard operation
locations, and device transmissions under highest rated energy power of all testing
frequencies are to be performed. Even though the SAR value is decided under the
highest rated energy power, the actual SAR value when operating the device will
•
•
•