Doosan M0609 User Manual Download Page 110

Page: 110 / 190

Doosan Robotics User Manual v1.9

110

8.4

Edit Task

When a task is created, the user can add commands in the

Task List

, and when the Properties of the

added command are configured, the task program can be executed. The

Task Builder

screen offers

an edit function for adding/deleting/copying commands or changing the order of commands.

The

Task

Builder

commands consist of motion commands, flow control and other commands, and skill

commands.

Note

When attempting to enter the

Home

Workcell Manager

Task Writer

screen, a message

Confirming whether to save the program being edited is displayed.

Jog

and

Settings

screens are

displayed as popup windows. For more information about the

Status

Jog

and

Settings

popup

windows, refer to “

Note

– Robot

Work Status List

Check the robot status shown in the status display area. The information can be used as a
reference when performing work using the robot.



Standby

: In this status, the robot can be operated, robot settings can be changed or motions

can be tested.



Operation: In this status, the robot is operating, and robot settings cannot be changed.



Safety

Off: The power to the motor and brake are cut off, and the robot has stopped.



Safety

Stop: The robot has stopped due to an error or safety issue, so stop the current work

and check the robot.



Emergency

Stop: the robot has stopped due to the activation of the emergency stop button.

Work Screen Area."

Summary of Contents for M0609































































































































































































Search results

Summary of Contents for M0609

Reviews:

Related manuals for M0609

Brands by name

Popular brands

Doosan M0609, User Manual

Search results

Summary of Contents for M0609

Reviews:

Related manuals for M0609

Brands by name

Popular brands