2
FOREWORD
9/275, 9/305, 12/250, 17/240, 21/220
The contents of this manual are considered to be proprietary and
confidential to and should not be reproduced without the prior written
permission of the company.
Nothing contained in this document is intended to extend any
promise, warranty or representation, expressed or implied, regarding
the products described herein. Any such warranties or other terms and
conditions of sale of products shall be in accordance with the standard
terms and conditions of sale for such products, which are available
upon request.
This manual contains instructions and technical data to cover all
routine operation and scheduled maintenance tasks by operation and
maintenance staff. Major overhauls are outside the scope of this
manual and should be referred to an authorised service department.
The design specification of this machine has been certified as
complying with EC directives. As a result:
a) Any machine modifications are strictly prohibited, and will invalidate
EC certification.
b) A unique specification for USA/Canada is adopted and tailored to
the territory.
All components, accessories, pipes and connectors added to the
compressed air system should be:
•
of good quality, procured from a reputable manufacturer and,
wherever possible, be of a type approved by the company.
•
clearly rated for a pressure at least equal to the machine maximum
allowable working pressure.
•
compatible with the compressor lubricant/coolant.
•
accompanied with instructions for safe installation, operation and
maintenance.
Details of approved equipment are available from the company
Service departments.
The use of repair parts / lubricants / fluids other than those included
within the approved parts list may create hazardous conditions over
which the company has no control. Therefore the company cannot be
held responsible for equipment in which non-approved repair parts are
installed.
The company reserves the right to make changes and
improvements to products without notice and without incurring any
obligation to make such changes or add such improvements to
products sold previously.
The intended uses of this machine are outlined below and
examples of unapproved usage are also given, however the company
cannot anticipate every application or work situation that may arise.
IF IN DOUBT CONSULT SUPERVISION.
This machine has been designed and supplied for use only in the
following specified conditions and applications:
•
Compression of normal ambient air containing no known or
detectable additional gases, vapours. or particles
•
Operation within the ambient temperature range specified in the
GENERAL INFORMATION
section of this manual.
The use of the machine in any of the situation types listed in
table 1:-
a Is not approved,
b) May impair the safety of users and other persons, and
c) May prejudice any claims made against the company.
The company accepts no responsibility for errors in translation of
this manual from the original English version.
©
COPYRIGHT 2012
DOOSAN COMPANY
TABLE 1
Use of the machine to produce compressed air for:
a) direct human consumption
b) indirect human consumption, without suitable filtration and purity
checks.
Use of the machine outside the ambient temperature range
specified in the
GENERAL INFORMATION SECTION
of this
manual.
This machine is not intended and must not be used in potentially
explosive atmospheres, including situations where flammable
gases or vapours may be present.
Use of the machine fitted with non approved components /
lubricants / fluids.
Use of the machine with safety or control components missing or
disabled.
