Installation of Heater
6500-480-
E
-
3
-1
9
DoorKing Part Number
6500-480
Copyright 2011 DoorKing, Inc. All rights reserved.
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
Kit Includes:
Heater and Fan Assembly, mounting plate and mounting bracket, 3 bolts - lockwashers - nuts, 2 heater locknuts.
Heater Locknut
Run
power wires
through chass
is.
ON
OFF
Heater
and Fan
Assembly
Mounting Bracket
Mounting
Plate
Power Connection
Connect the heater power wires to primary/single
6500
/6524
source 115 VAC
.
To secondary
operator heater if
installed.
DANGER
HIGH VOLTAGE!
Heater Switch
Neutral
Hot
115 VAC Models
Only!
1
2
DANGER
HOT!
Note: Older model
6500s may need to
have chassis hole
drilled for this bolt.
Chassis
Shut off ALL power to operator
Note for Bi-Parting Dual Gate Operators:
Run two (AWG 16-600 volt insulation)
power wires from the
primary
operator
power terminal through the interconnection
cable conduit to power the secondary
operator’s heater.
Do Not
wire secondary
heater directly to the secondary operator’s
terminal or damage will occur.
ON
-
Normal setting.
Automatically turns the heater and
fan
ON
when the temperature drops below 40°F (4°C) inside
the operator, and turns the heater and fan
OFF
when the
temperature rises above 55°F (13°C) inside the operator.
OFF
- Turns the heater and fan off.
ON
OFF
Keep wires
aw
ay from
the heater
vent.
Power Wires
3 Bolts, Lockwashers
and Nuts
