manualshive.com logo in svg

DongFeng DFH4180 Series, User Manual

The DongFeng DFH4180 Series user manual is a comprehensive guide that provides detailed instructions for operating and maintaining your DFH4180 truck model. Designed with user convenience in mind, this manual can be easily accessed and downloaded for free from our website, ensuring easy access to valuable information.

Share
Download
background image

Structure and Operation  

D760.H03E-001.H1907

63

Integrated door switch

The driver's side

Window regulating

Manual: long press the up/down button of 

the switch, and the glass will rise/fall accord-
ingly; Release the up/down button and the glass 
will stop.

Automatic: short press the down button of 

the switch to automatically lower the glass; Dur-
ing the descent, press the up/down button 
again, and the glass stops until the switch is 
operated again.
Door unlock and lock

Press the unlock button, the two doors are 

locked, and the cab door handle is automatically 
changed to the locking position. Press the lock 
button to unlock both doors, and the cab door 
handle is automatically changed to unlock posi-
tion.
Rearview mirror adjustment

First you need to select the rearview mirror. 

Press "L" to select the left mirror; Press "R" to 
select right

Mirror. Press each direction key of the 

rearview mirror direction adjustment button to 
adjust the direction of the rearview mirror. 
Release the switch to stop adjustment.
Rearview mirror heated

Click the switch to heat the rearview mirror, and the rearview mirror will automati-

cally heat for 20 minutes before stopping. When in the heating state, press the switch 
again and the heating stops.

CAUTION:
Continuous or frequent operation of window regulator to a certain num-
ber of times, may appear glass lifting function temporarily malfunction. 
This is more likely to happen in warmer environments. This is not a fault, 
but the window regulator motor overheating into the protective state. 
Just wait patiently for a few minutes, when the motor temperature drops 
naturally, the glass lifting function will automatically return to normal. 

1. Driver's side glass "lift" switch
2. Driver's side glass "drop" switch
3. Door lock switch
4. Left rearview mirror selection 

switch

5. Rearview mirror direction adjust-

ment button

6. Rearview mirror heating indicator 

light

7. Rearview mirror heating switch
8. Right rearview mirror selection 

switch

9. Door unlock switch
10.Passenger side glass "lift" switch
11.Passenger side glass "drop" 

switch

Summary of Contents for DFH4180 Series




























































































































































































































































Reviews:

No comments

Related manuals for DFH4180 Series

FENDT 5275 C Original Operator'S Manual preview
5275 C
Brand: FENDT Pages: 31
Hitachi BEKA-MAX Installation Instruction preview
BEKA-MAX
Brand: Hitachi Pages: 58
Farmtrac 6060DT Operator'S Manual preview
6060DT
Brand: Farmtrac Pages: 54
Vari ANV-350 Instructions For Use Manual preview
ANV-350
Brand: Vari Pages: 9
AVANT A37456 Operator'S Manual For Attachment preview
A37456
Brand: AVANT Pages: 26
FENDT Vario 712 Operating Manual preview
Vario 712
Brand: FENDT Pages: 6
Cub Cadet 3185 Operator'S Manual preview
3185
Brand: Cub Cadet Pages: 36
Walker A43 Operator'S Manual preview
A43
Brand: Walker Pages: 32
TYM T293HST Operator'S Manual preview
T293HST
Brand: TYM Pages: 96
TYM T1003 Operator'S Manual preview
T1003
Brand: TYM Pages: 130
Pelec Snowmatic Manual preview
Snowmatic
Brand: Pelec Pages: 10
Polaris Sportsman Touring 570 EPS 2021 Owner'S Manual preview
Sportsman Touring 570 EPS 2021
Brand: Polaris Pages: 186
Premier SNOW PLOW Operator'S Manual preview
SNOW PLOW
Brand: Premier Pages: 14
MASSEY FERGUSON 5400 BROCHURE 86-145 Brochure preview
5400 BROCHURE 86-145
Brand: MASSEY FERGUSON Pages: 44
MASSEY FERGUSON 1500 BROCHURE 28-46 Brochure preview
1500 BROCHURE 28-46
Brand: MASSEY FERGUSON Pages: 12
MASSEY FERGUSON MF 4700 Operator'S Manual preview
MF 4700
Brand: MASSEY FERGUSON Pages: 31
MASSEY FERGUSON MF 7700 Operator'S Manual preview
MF 7700
Brand: MASSEY FERGUSON Pages: 31
MASSEY FERGUSON 1726E Pocket Manual preview
1726E
Brand: MASSEY FERGUSON Pages: 31

Brands by name

Popular brands

Load more brands