background image

Donaldson Company, Inc.© 1998

30

Donaldson Company, Inc.
Torit Products
P.O. Box 1299
Minneapolis, MN
55440-1299 U.S.A.

The T

The T

The T

The T

The Torit

orit

orit

orit

orit

®

®

®

®

®

  W

  W

  W

  W

  Warranty

arranty

arranty

arranty

arranty

   Seller hereby warrants that it will, at its option, repair or replace the goods, or return
the purchase price thereof, which are found to be defective in material or workmanship,
or not in conformity with the contract requirements provided that, within one (1) year
of shipment thereof, Purchaser gives written notice of such defect to Seller, the
Purchaser returns the goods to a Donaldson Company designated point of manufacture,
with transportation charges prepaid by purchaser, and an examination by Seller
discloses to its satisfaction the existence of such defect or nonconformity with the
contract requirements.  In no event shall Seller be liable for any incidental, special or
consequential damages resulting from said defects or nonconformity.

   The foregoing does not apply to components which were not manufactured by seller,
and is expressly in lieu of all other warranties expressed or implied, including any
warranty or merchantability or fitness for a particular purpose or use.  There are no
warranties which extend beyond the foregoing.  No agent, employee or representative
of the Seller has any authority to bind the Seller to any affirmation, representation or
warranty concerning the goods sold under this sales contract and unless an affirmation,
representation or warranty made by an agent, employee or representative is specifically
included within this written agreement, it shall not be enforceable by the Purchaser.

IOM-75045-01

August 1998

© Copyright 1998 Torit

Printed in U.S.A.

PARTS ORDERING INFORMATION

PARTS ORDERING INFORMATION

PARTS ORDERING INFORMATION

PARTS ORDERING INFORMATION

PARTS ORDERING INFORMATION

When ordering parts, give model number

and serial number, part number, description

and quantity of parts desired.

Parts and Service Program

Parts and Service Program

Parts and Service Program

Parts and Service Program

Parts and Service Program

For genuine Torit replacement filters and

parts, call the Torit Express Line:

1-800-365-1331

1-800-365-1331

1-800-365-1331

1-800-365-1331

1-800-365-1331

Summary of Contents for Torit RVS-10































Reviews: