Dryflo, MMA and MMB
4
Options and Accessories
Inlet Hopper with Impact Separator
Impact separators are available for remote-mounted collectors in operations generating large amounts of small particulate such as
surface grinding, polishing and high-speed cutting.
Inlet Hopper with Flex-Duct
Available for ceiling mounted collectors or collectors on customer-supplied stands. Included components are a 6-in diameter collar,
10-ft flexible duct, two 6-in hose clamps and a 6-in mounting collar.
Drain Collection Container
The drain collection container is available for an impact separator only. The semi-clear one-gallon collection container attaches to
the bottom of the impact separator and collects small particles and coolant.
Junction Box
This option offers quick and easy wiring to the collector. The three phase motor is prewired to a customer requested voltage per
order. Labeled voltage on junction box should be verified to match supply voltage at installation.
HEPA Filter
The optional HEPA filter is recommended for applications using straight or mineral oil machining fluids that generate smoke or
other extremely small particulate and is used in place of the standard exhaust pack.
MMA Only:
Inlet Hopper with Vibration Isolators
A vibration isolation kit for top-mounted collectors installed on machine centers sensitive to vibration. The kit includes four isolators,
a support frame, hopper, 6-in diameter flexible duct and a duct collar with mounting flange and two hose clamps.
Inlet Hopper with Legs
This option is for machine centers that do not allow the collector to mount flush to the top. A leg mounted to the left side of the
collector and a hopper mounted to the right side provide a raised, level surface on the machine center.
Ceiling Mount
Collector can be suspended or hung from overhead supports.
Collector Stand
For applications with limited mounting surfaces, an adjustable stand is available. The stand’s base is bolted securely to the floor.
After attaching collector, the stand height can be adjusted from 84 to 102-in.
Cart
Available for applications requiring a mobile mist collector.
MMB Only:
Inlet Hopper with Gussets
This option is for machine centers that do not allow the collector to mount flush to the top. A leg mounted to the left side of the
collector and a hopper mounted to the right side provide a raised, level surface on the machine center.
