A3
Donaldson Company, Inc.
Unloading and Positioning
(Collectors are generally packaged and shipped laying on their side)
Collector should be lifted only by qualified crane or fork truck operators.
Failure to lift the collector correctly can result in severe personal injury and/or property damage.
Label on pack slip and bill of lading will state weight of the collector as delivered.
1. Lift the packaged collector from transport container.
2. Remove any crates or shipping straps.
3. Use all lifting points provided.
4.
Use clevis connectors, not hooks, on lifting slings.
5. Use spreader bars to prevent damage to collector’s casing.
6.
Check the Specification Control drawing for weight and dimensions of the collector and components to ensure adequate crane
capacity.
7. Inspect for any damage and/or missing parts and report to freight carrier.
8. Check for any hardware which may have become loose during shipment and tighten as necessary.
Lift collector and accessories separately and assemble after collector is in place.
Use drift pins to align holes in section flanges during assembly.
Delivery and Inspection
Upon arrival inspect collector and report any damage to delivery carrier. File any damage claims with the delivery carrier. Request
a written inspection report from the Claims Inspector to substantiate all damage claims.
Compare the collector received with the description of product ordered. Report any incomplete shipments to the delivery carrier
and your Donaldson Torit representative.
