Dalamatic Cased, DLMC 1/2/15 through 4/8/15
12
Compressed Air Pulse Cleaning Control System
diaphragm
bleed hole
compressed air
from manifold
diaphragm
valve closed
pilot
valve closed
controller
compressed air
diaphragm
valve open
pilot
valve open
controller
to jet tube
connection tube
connection tube
Electrical Wiring
Electrical installation, service,
or maintenance work must
be performed by a qualified electrician and
comply with all applicable national and local
codes.
Turn power off and lock out electrical
power sources before performing service or
maintenance work.
Do not install in classified hazardous
atmospheres without an enclosure rated for
the application.
All electrical wiring and connections, including electrical
grounding, should be made in accordance with the
National Electric Code (NFPA No. 70-latest edition).
Check local ordinances for additional requirements that
apply.
The appropriate wiring schematic and electrical rating
must be used. See collector’s rating plate for required
voltage.
An electric disconnect switch having adequate amp
capacity shall be installed in accordance with Part IX,
Article 430 of the National Electrical Code (NFPA No.
70-latest edition). Check collector’s rating plate for
voltage and amperage ratings.
Refer to the wiring diagram for the number of wires
required for main power wiring and remote wiring.
Summary of Contents for Dalamatic Cased DLMC 1/2/15
Page 35: ......
